Designed for installation at or near the location of the video display, ViewLinX also encodes audio from a TV monitor output for listening on networked speakers in the same zone or other zones. The NetStreams DigiLinX Video Distribution solution can distribute high definition video or standard definition video, depending on the video source connected to the MediaLinX MLAV300.
Incorporating a high quality video processor, ViewLinX delivers stunning video quality to your display, decoding the uncompressed video signals from the network. NetStreams patent-pending StreamNet™ technology insures the synchronization of audio and video signals for point to point, and point to multi-point distribution, delivering the highest quality with the lowest latency at data rates of up to 1Gbps. NetStreams PerfectPixel™ technology insures reliable delivery of video data and eliminates dropped packets across the network, resulting in pixel-for-pixel, high definition video distribution. ViewLinX VL100 also delivers superb audio quality, and features a 96kHz/24-bit BURR-BROWN digital-to-digital (DAC) converter, for increased accuracy of audio replication. Audio is available in Digital and Analog.
The ViewLinX VL100 is the only IP Video decoder that offers uncompressed, Pixel-for-Pixel, Bit-for-Bit, high definition, audio and video - unmatched in the emerging world of IP Audio/Video.
The ViewLinX VL100 features component, S-Video, composite or VGA video outputs as well as analog and S/PDIF RCA audio outputs for maximum connection flexibility. An RCA audio input is also included for TV monitor output. The VL100 also includes an RCA output for power management sensing (video, level, or LED sensing), a 3.5mm IR/RS-232 connection for easy control of the display, an IR Receiver input connection (IR Receiver included), and a Phoenix connector for power. An additional IR Out/RS-232 connection provides two-way control of an A/V receiver. The relay output can drive a projector lift, motorized screen, or other items.
Installation and programming of the VL100 Video Decoders is easy and flexible. Integrators can easily and quickly configure the system using NetStreams DigiLinX Dealer Setup Program. Learning IR codes for your display is efficient and quick, thanks to an integrated IR receiver.
The ViewLinX can be powered by either the PowerLinX PL228 plug in power supply or the PowerLinX PL600 central power supply.
Designed to mount on or adjacent to a display, the VL100 can be mounted on the wall behind the display (wall bracket tabs included), or rack mounted. Various mounting options are available for VL100: place on top of a cabinet shelf or TV (4 rubber feet included), mount on rack using optional rack shelf where up to two (2) VL100’s can be mounted on a 19" rack, or mount vertically on wall using L brackets (included).
Offer your customers a "future-compatible" distributed video and audio system with NetStreams ViewLinX IP Video Decoder. Upgrade the firmware via the DigiLinX Dealer Setup Program. And that is just the beginning. NetStreams is creating the future IP A/V today.